Behind the gas bans.
Our sources and data. Every figure on the site traces back to a row below; the calculator’s full method follows.
Calculator methodology
How the household cost calculator builds its estimate.
The calculator models a full gas-to-electric conversion of space heating, water heating, cooking and clothes drying for a typical household in the selected state, then compares annual utility cost today against the all-electric case. It is a transparent, fixed-assumption model, not a quote.
Model overview
What the calculator uses.
Four visible inputs: state, county or locality, home type and the replacement heating system. Consumption, energy prices, equipment efficiency and gas end-use shares are fixed model inputs rather than user-adjustable controls.
Income does not change energy consumption or equipment efficiency; it is collected for a future energy-burden output and is not used in the figures shown today.
Location
State and county selection.
County and county-equivalent names come from the U.S. Census Bureau’s 2025 Gazetteer files. Maryland includes Baltimore city; Virginia includes independent cities; DC is treated as a single citywide county equivalent.
The selected county personalizes the result, but the energy-price benchmark remains state-level. County-level calibration is possible in a later version using DOE’s LEAD tool.
Household baseline
Energy-use starting points.
| State | Annual electricity | Annual gas |
|---|---|---|
| Maryland | 11,526 kWh | 559 therms |
| District of Columbia | 7,020 kWh | 352 therms |
| Virginia | 12,937 kWh | 571 therms |
State profiles were supplied as campaign working data described as EIA RECS-based examples. Home type scales them using EIA RECS 2020 Southern-region housing-type consumption ratios; the condominium mapping uses the 5+-unit building proxy.
Energy prices
Fixed state-average benchmarks.
| State | Electricity | Natural gas |
|---|---|---|
| Maryland | 21.27¢/kWh | $16.14/Mcf (2024) |
| District of Columbia | 24.54¢/kWh | $16.68/Mcf (2025) |
| Virginia | 16.69¢/kWh | $16.79/Mcf (2025) |
Electricity uses EIA residential state averages for January–June 2026. Natural gas uses EIA annual residential state averages (2025 for DC and Virginia; 2024 for Maryland, the latest available). Gas prices are converted to dollars per therm using 1,036 Btu per cubic foot. State averages are not individual utility tariffs.
Energy conversion
How the annual bill is calculated.
Annual gas use is split among space heating, water heating, cooking and drying using EIA RECS 2020 national natural-gas end-use totals. All four uses are converted to electricity in the gas-ban scenario.
added electric kWh = allocated gas therms × (100,000 ÷ 3,412) × gas efficiency ÷ electric efficiency
Fixed efficiency assumptions: gas furnace AFUE 92%; seasonal heat-pump COP 2.8; electric resistance COP 1.0; gas water heater 0.62; heat-pump water heater 3.3; gas cooking 0.40; induction 0.84; gas dryer factor 0.65; electric dryer 1.0. The two heating choices change only the space-heating replacement. Water heating is modeled as a heat-pump water heater in both cases, cooking as induction, drying as electric.
Upfront conversion cost
The $22,500–$40,000 benchmark.
A fixed whole-home conversion benchmark constructed from published component costs, not a contractor quote. Rewiring America’s March 2024 report estimates a whole-home air-source heat pump at $17,000–$23,000 for a 1,500–2,500-square-foot home, a heat-pump water heater replacing gas at $4,100–$6,800, an induction range at $1,000 and up, and an electric dryer at $400 and up. The lower-end components total $22,500 before additional wiring; for larger homes the bundle reaches roughly $39,000, rounded to $40,000.
Electrical-panel, service and rewiring work are not added on top of the cap. Berkeley Lab’s 2026 research reports separate single-family medians of $3,500 for panel replacement, $2,800 for customer-side service equipment and $5,000 for rewiring when those projects were required. The model does not subtract the cost of a future scheduled gas-equipment replacement, and it does not forecast inflation, financing, maintenance, rate escalation or rebates.
Primary sources
Where every constant comes from.
AREA calculator methodology · version 2.0.0 · September 2026. Questions about a figure: email info@affordablereliable.org.
Take action